8
OPERATION CONTROLS & FUNCTIONS
Front Panel - TRANSMITTER
q
ISP PINHOLE:
This button is reserved for factory use only.
w
STD/UPDATE SWITCH:
This switch is reserved for factory use only.
Note:
This should be left on the default setting of
“STD”
for normal operation.
e
RS-232 PORT:
Connect to a PC, laptop, or serial controllable device for the extension of RS-232
signals between both ends of the HDBaseT™ connection.
r
POWER LED:
This LED will illuminate to indicate the unit is on and, receiving power.
SYNC LED:
This LED will illuminate when a live input source is detected.
Summary of Contents for ANI-527RX
Page 13: ...CONNECTION DIAGRAM 11 ...
Page 18: ...THIS PAGE IS INTENTIONALLY LEFT BLANK ...
