5
OPERATION CONTROLS & FUNCTIONS
TRANSMITTER
SIDE PANEL
q
EDID DIP SWITCH:
Used to set EDID mode. Please refer to Section “6. EDID Mode” for details.
w
SERVICE PORT:
(2) USB MICRO-B; Used for firmware update and serial port com. Please refer to “7. ASCII Commands”.
CAT Receiver
q
HDMI OUT:
HDMI output port, connect to HDMI display device such as TV or Projector with an HDMI cable.
w
CAT IN:
Connect to the CAT OUTPUT port on the transmitter with a CAT cable.
e
POWER INDICATOR LAMP (GREEN):
When the receiver is powered on, the power indicator lamp will be on.
r
DATA SIGNAL INDICATOR LAMP (ORANGE):
Illuminates when the device has a valid connection to the base unit.
t
SERVICE PORT:
Used for firmware update.
y
IR IN:
Connect to the IR Receiver cable. The IR signal will send to the IR OUT port of the transmitter.
u
DC 12V:
Plug DC 12V/1A power supply into the unit and connect the adapter to an AC outlet.
(
Note:
The CAT receiver also can be powered by the transmitter via a CAT cable.)
A
NEU
VIDEO
