Instruction manual
Interface Cable
SC01-PFX
PART NO. Z1-006-910, IB033561
Jul. 2018
The SC01-PFX is a dedicated cable for use in connecting a Kikusui PFX2500 Series Charge / Discharge System Controller to a
Kikusui PAT-T Series Regulated DC power supply. Because the cables that are necessary for making this connection are already
assembled, you can connect the system controller and the DUT easily and in a short amount of time.Before you use the product,
thoroughly read the
“
Safety Symbols
”
and
“
Safety Precautions
”
that are written in the PFX2500 Series Charge / Discharge
System Controller operation manual.
When shipped from the factory, a protective socket is attached to the J1 connector of the PAT-T series. Store this socket so that
you can reuse it when the cable is removed.
Checking the Package Contents
Check that all parts are included and that they are not
damaged. If any of the parts are damaged or missing, contact
your Kikusui agent or distributor.
How to Use
Check that the POWER switch is turned off. Insert it securely using the lock lever and hook. Check that it does not fall out.
CAUTION
When removing a cable from a device, remove it while holding the connector’s lock lever or hook without
pulling on the cable.
Example of Connecting a PFX2512 to the PAT40-200T
–
–
+
PFX2512
PAT40-200T
Ferrite core
J1 connector
DC POWER SUPPLY connector
Operation manual
( This manual, 1 coopy)
SC01-PFX [With core] (1 pc.)
Length: Approx. 1 m
Lock lever
To
J1 Connector
for PAT-T
To DC POWER SUPPLY
for PFX2500 series
Hook
Attach the
lock lever
KIKUSUI ELECTRONICS CORP.
1-1-3 Higashiyamata, Tsuzuki-ku, Yokohama,
224-0023, Japan
Tel: +81-45-482-6353 Fax: +81-45-482-6261
http://www.kikusui.co.jp/en
Website
The newest version of the operation manual can be downloaded
from Download service of Kikusui website. © 2018
