4
OPERATION CONTROLS & FUNCTIONS
TRANSMITTER
FRONT PANEL
q
POWER SWITCH:
Press this switch to power on/off the device.
w
POWER LED:
When the device is powered on, the red power LED will be on.
e
IN LED:
When the HDMI IN port connects an active source device, the green LED will be on.
r
LOOP LED:
When the HDMI LOOP OUT port connects an active display device, the green LED will be on.
t
OUT LED (1~8):
When the HDMI OUT port connects an active display device, the corresponding green OUT LED will be on.
BACK PANEL
q
AUDIO OUT (COAX, L/R):
Coaxial/analog audio output port, connect to amplifer or speaker.
w
HDMI PORT:
IN:
HDMI input port, connect to HDMI source device such as DVD or set-top box with an HDMI cable.
LOOP OUT:
HDMI loop output port, connect to the HDMI display device such as TV or Monitor with an HDMI cable.
e
CAT OUTPUT PORT (1~8):
Connect to the CAT IN port of the CAT receiver with a CAT cable.
r
LINK SIGNAL INDICATOR LAMP (GREEN):
Illuminate:
Transmitter and receiver are connected.
Dark:
Transmitter and receiver are not connected.
t
DATA SIGNAL INDICATOR LAMP (ORANGE):
Illuminate:
There is signal transmission between the transmitter and the receiver.
Dark:
No signal transmission.
y
IR OUT:
Connect the IR Blaster cable to transmit IR signal from the CAT receiver.
u
DC 12V:
Plug the DC 12V power supply into the unit and connect the adaptor to an AC outlet.
(
Note:
The transmitter can power the receiver via a CAT cable.)
A
NEU
VIDEO
