7
REMOTE CONTROL
Before making any connections to the switcher. Observe the following:
• Ensure the main voltage supply matches the label on the supplied plug-pack (+/-10%).
•
Ensure that the power switch is OFF.
•
Ensure that all system grounds (earth) are connected to a common point.
•
Avoid powering equipment within a system from multiple power sources that may be separated by large distances.
•
Connect all audio video sources and destination equipment.
•
Power up all source and destination audio-visual sources.
•
For each destination output select the appropriate input source by using the front panel input select buttons. The supplied IR remote
control. Or through the RS-232 serial communications port.
•
Upon powering up the switcher, it will return to its last used setting before being powered down.
IR REMOTE CONTROL KEY
q w
SWITCH POWER ON or OFF:
Power ON and OFF
e
DESTINATION: 1 thru 4 OUTPUT SELECTION:
Destination buttons to select the output display channel
r
SOURCE: 1 thru 4 INPUT SOURCE SELECTION:
Input 1~ 4 source selection buttons
t
FUNCTION KEY:
Function selection buttons
ALL
DEMO or ENTER
EDID
LOCK
y
SELECT EDID MODES: PRESS SOURCE BUTTONS 1 thru 2:
1. Mode 1 : FSS (Fast Speed Start)
2. Mode 2 : H24-3D
3. Mode 3 : H24M-3D
4. Mode 4 : H36
5. Mode 5 : H36M
6. Mode 6 : H36-3D
7. Mode 7 : H36M-3D
A
NEU
VIDEO