11
EDID FUNCTION
EDID Function: LEARNING
LEARNING EDID SINGLE TO SINGLE
EXAMPLE: LEARN DESTINATION #4 EDID TO SOURCE #2.
Step 1.
Press the
EDID
button
The button will flash blue and the display will show the current Embedded EDID Status.
Step 2.
Press the
DESTINATION #4
button row
Copy the Destination #4 Display EDID.
Step 3
.
Press the
SOURCE #2
button row
Learning the Destination #4 EDID to Source # 2.
Step 4.
Press
ENTER
button
To confirm entries.
LEARNING EDID SINGLE TO MULTIPLE
LEARNING DESTINATION EDID LINK TO THE MAJORITY SOURCES
Step 1.
Press the
EDID
button
The button will flash blue and the display will show the current Embedded EDID Status.
Step 2.
Press the Destinations
#1~4
button row
Copy any 1~4 Destinations EDID.
Step 3.
Press the Source
#1, #3 ~ #4
button row
Learning the Destination EDID link to source #1, #3 ~ #4.
Step 4.
Press
ENTER
button
To confirm entries.
LEARNING EDID SINGLE TO ALL
LEARNING DESTINATION EDID LINK TO ALL SOURCES
Step 1.
Press the
EDID
button
The button will flash blue and the display will show the current Embedded EDID Status.
Step 2.
Press Destination button
1 THRU 4
Learning anyone 1~4 Destination EDID to all sources.
Step 3.
Press
ALL
button
Learning selected destination EDID to all sources.
Step 4.
Press
ENTER
button
To confirm entries.
HOW TO SETUP FSS
®
FUNCTION
FAST SPEED START
®
Step 1.
Press the Destination
#1~4
button row
Then Press the Source
#1~4
button row
To setup and Install all devices.
Step 2.
Press the
EDID
button
Select a optimum status of
Embedded
EDID
mode.
Step 3.
Press
ENTER
button
To conform entries.
Step 4.
Press the
EDID
button
To select the EDID
FSS
®
mode.
Step 5.
Press
ENTER
button
To conform entries.
LEARNING EDID
LEARNING EDID FROM DESTINATION TO SOURCE
Learning EDID setup
Press
EDID > DESTINATION > SOURCE > ENTER
Press
EDID > DESTINATION
Button: The LCM will be show LEARNING
Switcher will
LEARN
destination HDMI EDID and pass the selected source.
Learning EDID setup for HDMI Key Press Sequence:
EDID > DESTINATION # > SOURCE # > ENTER
The EDID for HDMI has been learned
NOTE:
The already learned EDID cannot be modified. You can only rebuild a new Learning EDID.
For Example:
When the Source has “Learned” the EDID data from a destination, It will save that EDID information into EPROM and
the EDID data cannot change. Please select new learning destination to sources or change to one of the embedded EDID modes when
you want to remove the learning EDID memory from EPROM.
LEARNING EDID Definition
Learning EDID from Destination to Source
1. Switcher will
LEARN
destination EDID and pass the selected source.
2. To set up learning between a single destination and single source:
Press
EDID
button > Press
DESTINATION 1 THRU 4
> Press
SOURCE 1 THRU 4
> Press
ENTER
to confirm.
Switcher will learn destination EDID to source device.
3. To set up learning between a single destination and Multiple sources:
Press
EDID
button > Press
DESTINATION 1 THRU 4
> Press the majority
SOURCES 1 THRU 4
> Press
ENTER
.
Switcher will learn single destination EDID to many source devices.
4. How to Learning single destinations with all sources. Press
EDID
button > Press
ALL
button > Press
ENTER
to confirm.
A
NEU
VIDEO
