3
FRONT PANEL
FRONT PANEL
q
POWER SWITCH:
The power switch turns the unit ON and OFF. The LCM will illuminate red to indicate that the switcher is ON
and is receiving power. The switcher will remember the last state during a power cycle. When power is removed and resorted, the last
configuration will be evoked.
w
INPUT STATUS DISPLAY:
Indicates system setup information and current matrix route cross-points.
e
OUTPUT STATUS DISPLAY:
Each Output (destination) channel shows which input (source) it is assigned.
r
DESTINATION SELECT BUTTONS:
Indicates system setup information and current matrix route cross-points. Separate outputs
1 thru 4 select buttons are provided for each destination assignment. Routing can be source to destination or one source to multiple
destinations.
Example:
Press Destination 1, 2, 4 then press Source 2. It will route Input 2 to Output 1, 2, 4 respectfully.
t
EDID MODE SELECT BUTTONS:
Used to select an EDID mode using Input buttons #1 and #2.
y
IR SENSOR:
The IR sensor receives IR commands from the supplied remote control or third party IR emitter.
u
SOURCE SELECT BUTTONS:
Separate Inputs 1 thru 4 select buttons are provided each source selection.
i
FUNCTION KEY - ALL:
Disables (mutes) video on all destinations OR selects the same source to all destinations.
Option 1
- Press
ALL
followed by
OFF
button. The display will show “0“ indicating all destinations
have no video selected.
Option 2
- Press
ALL
followed by Source
1 THRU 4
. The display will show the source selected.
- Press
ENTER.
The pre-set source selection will be assigned all destinations.
A
NEU
VIDEO
