10
CHANGEABLE CARDS
CHANGEABLE CARDS INTRODUCTION & INSTALLATION
The various ANI-MOD chassis units are designed to work with various changeable cards, which can be installed in any ANI-MOD empty
slot (these cards are hot-swappable). Cards are connection speci
fi
c, designed to accept signals such as DVI, HDMI, VGA, HDBaseT, and
SDI. You will
fi
nd an introduction to each type of card below:
DVI
Signal
Card.
ANI-IN-DVI
&
ANI-OUT-DVI
These cards are fully compatible with HDMI1.3 and HDCP, but do not support analog signal. They have embedded EDID management
technology, supporting CEC, DDC.
ANI-IN-DVI:
Is an input card which accepts a maximum of four separate DVI input signals. Input signals can be passed to output devices
through ANI-OUT-DVI, or passed through to other types of outputs, through other output cards in the series.
ANI-OUT-DVI:
Is an output card, which provides a maximum of four separate DVI output signals. Input signals can come from an ANI-IN-
DVI, or from other kinds of input cards in the series.
Pin Layout of the DVI-I connector (Dual-Link). (Female)
PIN
Function
PIN
Function
1
T.M.D.S.Data2-
13
T.M.D.S.Data3+
2
T.M.D.S.Data2+
14
+5V Power
3
T.M.D.S. Data 2/4 Shield
15
Ground (for +5V)
4
T.M.D.S. Data 4-
16
Hot Plug Detect
5
T.M.D.S. Data 4+
17
T.M.D.S. Data 0-
6
DDC Clock
18
T.M.D.S. Data 0+
7
DDC Data
19
T.M.D.S. Data 0/5 Shield
8
No Connect
20
T.M.D.S.Data5-
9
T.M.D.S.Data1-
21
T.M.D.S.Data5+
10
T.M.D.S.Data1+
22
T.M.D.S. Clock Shield
11
T.M.D.S.Data1/3 Shield
23
T.M.D. S. Clock +
12
T.M.D.S.Data3-
24
T.M.D.S .Clock-
