TCP/IP CONTROL
(OPTIONAL)
The TCP/IP port of ANI-MOD is used for TCP/IP control. Below is the introduction for TCP/IP control. The ANI-MOD does not have a build-
in web server for control. The TCP/IP connection requires you either send comments manually or from a third-party controller.
IP CONFIGURATION
1) Connect a computer to the TCP/IP port with a CAT5 or CAT6 cable.
2) set the ANI-MOD IP to the same IP section, but not the same IP address, as the default IP of ANI-MOD (192.168.0.178). To access this,
click on Network Connections in the Windows Control Panel. Then right click on the Local Area Connection and select Properties from the
context sensitive menu. In the dialog box that appears, select “Internet Protocol Version 4 (TCP/IP v4). This will open the following dialog
box, where you can set the IP address.
Figure 1: TCP/IP Setup
3) Enter 192.168.0.178 in your web browser, you should see the LOGIN page.
Figure 2: TCP/IP Login Screen
23
Same IP section but cannot be
192.168.0.178
