3
OPERATION CONTROLS AND FUNCTIONS
Splitter
q
POWER SWITCH:
Power ON\OFF Switch.
w
POWER LED:
This red LED illuminate when the device is connected with power supply.
e
IR IN:
IR Control System over CAT5e/6 Cable IR Receiver. Source to SINK, plug Wideband IR Rx into this unit.
r
IR OUT:
IR Control System over CAT5e/6 Cable IR Transmitter. SINK to Source, plug Wideband IR Tx into this unit.
t
EDID Selector:
Select output signal format via EDID Selector.
y
UPDATE:
System software update.
u
OUTPUT Area:
Four RJ45 Jacks provide signal output.
i
HDMI LOOP OUT:
Local HDMI loop output port.
o
HDMI INPUT:
HDMI Input port. Connect source with HDMI cable.
a
DC IN:
Plug the 12V2.5A DC power supply into the unit.
receiver
q
CAT6:
Connect the CAT input of the receiver with the CAT output of the transmitter with CAT5E/6 cable.
w
EQ Selector:
Equalizer selector.See the EQ description.
e
LOCK LED:
This red LED will illuminate when the Splitter and Receiver is connected with CAT5e/6 cable.
r
HDMI OUT:
HDMI Output port. Connect to TV with HDMI cable.
t
DC IN:
Plug the 5V1A DC power supply into the unit.
y
IR RX:
IR Control System Over CAT5e/6 Cable IR Receiver. SINK to Source, plug Wideband IR Rx into this unit.
u
IR TX:
IR Control System Over CAT5e/6 Cable IR Transmitter. Source to SINK, plug Wideband IR Tx into this unit.
A
NEU
VIDEO
