ENGLISH
B-TWIG 12
| User manual
10
11
User manual
|
B-TWIG 12
System type
Active column system
Subwoofer
(B-TWIG 12S)
1 x 12” custom speaker - 2.5” V.C
Array speaker
(B-TWIG 12CS)
8 x 2.75” Neo custom speakers - 0.75” V.C
Average dispersion
Horizontal 120°
Frequency response
45Hz - 20kHz
SPL - MAX
123 dB
Amplifier
Class D
Peak Power (LF+HF)
2000 W
Crossover
24dB/Oct @ 200Hz
I/O connectors
LINE IN: 2 x Combo XLR-F + Jack 6,35mm (1/4”)
OUT/THRU: 2 x XLR-M
Controls
Master Level, Subwoofer Level, Phase 0°/180°
Power supply
200-240V~ 50-60Hz
Fuse
T4A L 250V~
Fastening mechanism
Custom slide connector with automatic lock
Cabinet
12mm plywood
Surface finishing
Scratch-resistant coating with high mechanical
resistance
B-TWIG 12S
B-TWIG 12CS
Dimensions (W x H x D)
370 x 603 x 505mm
14.6” x 23.7” x 19,9”
105 x 707 x 100mm
4.1” x 28.8” x 3.9”
Weight
19 kg – 41.2 lbs
4.6 kg - 10.1 lbs
6
|
TECHNICAL SPECIFICATIONS
5
|
TROUBLESHOOTING
PROBLEM
LEDS
SOLUTION
No sound or very
low sound level
Power LED
turned off
Make sure the device is properly
connected to the mains outlet
Power LED turned on,
but low MASTER VOL
Raise MASTER VOL level
Distortion
ON/LIMIT
LED lit red
ON/LIMIT
LED lit green
Lower MASTER level
Check the source level
Check proper connection between
subwoofer and A/B elements
Booming sound
Lower SUBWOOFER level
Harsh sound
Raise SUBWOOFER level
Lower MASTER level
Lower frequencies
small attenuation
Try reversing subwoofer
phase by pressing the PHASE switch
EMI CLASSIFICATION
According to the standard EN55103 this equipment is designed and suitable
to operate in E3 (or lower E2, E1) electromagnetic environments.