VSP-V-9020
Issue 6
1
947911
V-9020 – CEILING SPEAKER
INTRODUCTION
The V-9020 Ceiling Speaker is designed to easily
install into standard T-Bar suspended ceilings by
replacing 1/2 of a 2' x 2' ceiling tile (or 1/4 of a 2' x 4'
tile). The 1' x 2' perforated grille provides increased
sound dispersion over conventional round speaker
grilles and blends into the ceiling by providing the
appearance of a standard air return.
The speaker assembly features a perforated steel
grille, finished with a durable white epoxy powder
paint and an 8" full-range speaker. The V-9020 is
provided with a single input 1 Watt amplifier and
operates on 24VDC. A 24" T-Bar is included to cover
the area where the speaker assembly and ceiling tile
meet.
SPECIFICATIONS
Features
•
Perforated steel grille with white epoxy paint
•
8" (20.32cm) speaker
Dimensions / Weight
Dimensions:
23.75" L x 11.82" W x 3.40" D
(60.33cm L x 30.02cm W x 8.64cm D)
Weight:
6.5 lbs. (2.95) Kg.
Technical Specifications
Power Rating:
1Watt Continuous
Operating Voltage / Current:
24VDC, 50mA
SPL at 1 Meter with 1 Watt Input:
97dB
Environment
Temperature:
0 to 50 Deg. C (32 to 122 Deg. F)
Humidity:
0 to 85% non-precipitating
Coverage
The area covered by the V-9020 Ceiling Speaker is
determined by the height of the ceiling. If the ceiling
height is 8 feet, the speaker will cover 250 sq. ft. With
a ceiling height of 9 to 15 feet, the speaker will cover
400 sq. ft. If the ceiling is 16 to 25 feet high, the
speaker will cover 850 sq. ft.
CONNECTIONS
MOUNTING
When mounting in a 2' x 2' tile ceiling, cut ceiling tile
in half (When mounting in a 2' x 4' tile, remove 1/4 of
the tile). Make connections and place speaker on
ceiling grid. Slide T-Bar under edge of speaker. Drop
remainder of cut tile next to speaker.
