A-Link WNAPc, User Manual

Page: 41 / 92

3.3.13 WAN Interface Setup
This page is used to configure the parameters for wide area network that
connects to the WAN port of your WNAP 3G Mobile Router. Here you may
change the access method to
Static IP , DHCP , PPPoE , PPTP L2TP or GSM
3.5G by click the item value of WAN Access Type .
Static IP
Screen snapshot – WAN Interface Setup – Static IP
Item Description
Static IP Click to select Static IP support on WAN interface. There are IP
address, subnet mask and default gateway settings need to be done.
IP Address If you select the Static IP support on WAN interface, fill in the IP
address for it.
Subnet Mask If you select the Static IP support on WAN interface, fill in the
subnet mask for it.
Default Gateway If you select the Static IP support on WAN interface, fill in the
default gateway for WAN interface out going data packets.
MTU Size Fill in the mtu size of MTU Size. The default value is 1500