A-Link WNAPc, User Manual

Page: 51 / 92

Item Description
USB3G Click to select GSM 3.5G support on WAN interface. There are 3.5G
Devices, Authentication Number and APN settings need to be done.
USB3G Devices Select 3.5G device, this version supports many 3G modems. Auto
detect will detect all supported models automatically.
Authentication Number Please fill in Authentication Number from operator.
User Name Please fill in user name from operator.
Password Please fill in password from operator.
APN Please fill in APN(Access Point Name) from operator.
PIN Please fill in SIM card PIN number if PIN enabled on SIM.
Band Selection Choose band Auto, 3G only or 2G only. Default is Auto.
Connection Type Choose continuous or manual connect.
Enable 3G info Enable/Disable 3G information on STATUS page.
Enable Automatic
3Gwatchdog Feature Enable/Disable 3G connection watchdog feature. It will check the
3G connection timely and reboot router if 3G data connection down.
Enable keep alive HSPA When enabled, connection keeps on HSPA for 3G connection.
Advanced You can modify keep alive HSPA settings manually.
Attain DNS Automatically Click to select getting DNS address for GSM 3.5G support. Please
select Set DNS Manually if the GSM 3.5G support is selected.
Set DNS Manually Click to select getting DNS address for Static IP support.
DNS 1 Fill in the IP address of Domain Name Server 1.
DNS 2 Fill in the IP address of Domain Name Server 2.
DNS 3 Fill in the IP address of Domain Name Server 3.
Clone MAC Address Fill in the MAC address that is the MAC address to be cloned. Refer
to
4.24 What is Clone MAC Address?
Enable uPNP Click the checkbox to enable uPNP function.
Refer to 4.22 What is Universal Plug and Play (uPNP)?
Enable IGMP Proxy Click the checkbox to enable IGMP Proxy.
Enable Ping Access on
WAN Click the checkbox to enable WAN ICMP response.
Enable Web Server Access
on WAN Click the checkbox to enable web configuration from WAN side.
Enable FTP Server Access
on WAN Click the checkbox to enable FTP Server Access on WAN
Enable IPsec pass through
on VPN connection Click the checkbox to enable IPSec packet pass through
Enable PPTP pass through
on VPN connection Click the checkbox to enable PPTP packet pass through
Enable L2TP pass through
on VPN connection Click the checkbox to enable L2TP packet pass through
Enable IPV6 pass through
on VPN connection Click the checkbox to enable IPV6 pass through
Enable Automatic Reboot Click the checkbox to enable Automatic Reboot and choose the
value for day
Apply Changes Click the Apply Changes button to complete the new configuration
setting.
Reset Click the Reset button to abort change and recover the previous
configuration setting.