A-Link RoadRunner 40/44, Manual

Page: 37 / 54

36
Note: In the Static IP Address configuration window , enter the static IP
Address and subnet mask assigned by your network service provider
(ISP) for your WAN interface. The Static IP Address is a globally unique
IP address used to identify the Router on the Internet.
ENCAPSULATION
The Router supports 11 connection methods:
Note: This setting must follow your ISP.
BRIDGE : Enabled BRIDGE for Bridged Mode .
IGMP: Enabled IGMP . IGMP is the protocol used for a host member to
join or leave an IP multi-cast group:
PPP :
1. Username and Password : Username and Password are provided by
your ISP .
2. Service Name : Optional. Required by some ISPs.
Note : If you change any setting you must click execute for Virtual
Circuit 0 . Then click save configuration and click submit to write
settings to flash and reboot . The Router will save setting and software
reset automatically 20 seconds .
You can check READY LED indicator until blinking or click refresh
button of browser to view web page status.