27
5. Networking Settings
5.1 TCP/IP Configuration for Windows 98
Use the following steps to configure the manager PC to be a DHCP client.
These same steps must be performed for every host PC on your network
if you use the DHCP function of the Router.
1. Click
Start
button,
Settings
and choose
Control Panel
.
2. Double click
Network
icon and select
Configuration
tab.
3. Select the
TCP/IP
line that has been associated to your network card
in the Configuration tab and click
Properties
.
4. Now, you have two setting methods:
Summary of Contents for RoadRunner 40/44
