10
1. Getting started
(General information of product introduction)
PA500x2(b) adapters have below settings as factory defaults:
Network name = PLC30xxxx (xxxx=serial of numbers which same for adapter pairs)
Encryption = AES 128bit
PA500x2(b) adapters are set as pair and the connection between pair is encrypted as default.
Adapters work as bridge between networks. On
Step 2
you can find instructions to configure
your PC IP addresses for Internet connection.
Expanded network
If you want to expand your network and use more than two adapters, you can connect a new
adapter to the encrypted power line network with adapter Security button. First, press 2
seconds from new adapter and after that 2 seconds from other encrypted adapter on network.
When new adapter Powerline LED turn ON, new adapter has been joined to same network
with other adapters.
You can also expand your network with PowerPacketUtility software. First, install the
PowerPacketUtility software provided in CD. After that, set same network name ”Private
Network Name” to each adapter. More detailed instructions you can find from Utility Guide.
Reset to factory defaults:
You can reset to factory defaults by press the Reset button 10 seconds at
back side of the adapter when power on.
All rights reserved
