A-Link PA500x2(b) Utility Guide
10
6 Joining a Network
You can add a device to an existing HomePlug AV logical network (AVLN) using the
Security/Reset push button and using the Utility.
6.1 Using the Security/Reset Push button
When device A and device B are located on network N, and device C (the joiner)
not located in any networks attempts to join Network N. Any devices on Network N
can become the ‘adder’. Perform the followings to add the device C to Network N
using the Security/Reset button.
Step 1
Press the
Security\Reset
button on Device A (or Device B) for less than
3 seconds, making it the ‘adder’.
Step 2
Within 2 minutes, press the
Security\Reset
button on Device C (the
‘joiner’) for less than 3 seconds.
Step 3
Wait for connection completing. The Power indicator on Device A (or
Device B) and Device C will flash at 1 second intervals until the process
succeeds or fails. It will illuminate steadily on success.
If any error occurs, the Power indicator on Device A (or Device B) and Device C will
flash unevenly for 2 minutes.
