WARNING:
Do not change engine oil while it is hot.
Accidental contact with hot engine oil
could result in serious burns.
NOTE:
Used engine oil should be
disposed of at an approved disposal site.
See local retailer for more information.
Reach under the generator and
remove the black rubber seal located
below the oil drain plug.
Oil drain
plug.
Black rubber
seal (bottom)
Black rubber
seal (front)
Place a suitable container
underneath the generator to catch
the used oil.
Remove the oil fill cap/dipstick.
Remove the other black rubber seal
located in the front the oil drain plug.
Use a wrench through the hole ro
remove the oil drain plug and allow
the oil to drain completely.
Reinstall the oil drain plug. Tighten
the plug securely.
Reinstall the two black rubber seal
(the front one and the bottom one).
With the generator in a level position
and refill with engine oil following the
instructions in the Checking/Adding
engine oil section previously in this
manual. For amount of engine oil
needed to refill, see Product
Specifications earlier in this manual
or the accompanying engine manual,
if applicable.
Reinstall the oil cap/dipstick securely.
Reinstall the left maintenance cover.
Tighten screws to secure.
MAINTENANCE
30
Full Synthetic 5W-30
Degrees Celsiusº(Outside)
Degrees Fahrenheitº(Outside)
A-iPower Corp. 10887 Commerce Way Unit A Fontana, CA 92337 USA
www.a-ipower.com 1-855-888-3598 or [email protected].
