Suzhou A-hand Technology Co., Ltd. (215021)
Instruction
Address: No. 88, Tangzhuang Road, Suzhou Industrial Park, China
NO.
28
Tel: +86-512-6252-9140
http://
www.a-hand.com
V. Notes
Parameters can be divided into welding parameters and debugging parameters
according to the functions. All of the incremental setting parameters are debugging
parameter!
In order to effectively reflect the reproducibility of welding, all the incremental
setting parameters are proposed to be used in debugging!
In the state of editing, the remote control keys (except for emergency stop button)
and the head button are automatically locked!
VI Parameter Quick Search
While using device, in order to quickly find the required program, the equipment provides fast
query function, in idle mode, press the key
-
at same time, show as follows:
select the desired program, press
for selection of program, press
to exit.
VII How to Set Appropriate Welding Parameters
In the process of debugging a complex parameter, it is often necessary to debug the
parameters for many times in order to determine an appropriate welding parameters, you can
use the following methods:
Prepare a experience value parameter by experience
Only one section is the best for the parameters, and set the corresponding current
increment.
After making preparation according to steps of
“preparation before welding by
eight”, “start welding by nine”
, and begin to welding, observe the conditions of furnace
Program Name Program Name Diameter Occupied main memory
0 PR55 Ø52 0.4
℅
1 PRG90 Ø25 0.4
℅
50 Ø38 0.4
℅
60 Ø57 0.4
℅
.
.
