Suzhou A-hand Technology Co., Ltd. (215021)
Instruction
Address: No. 88, Tangzhuang Road, Suzhou Industrial Park, China
NO.
24
Tel: +86-512-6252-9140
http://
www.a-hand.com
4．6
Wire feed control
The wire feed of this machine has pulse function, the wire feed and current pulse are in the
synchronization, you can select the following parameters on demand (as shown in Item 4 of the Figure).
Wire feed or not K41 Wire feeder module code SN
Wire feed mode K42
Wire feed start degree
N40
Pulse wire feed speed
V42
Base wire feed speed
V43
Wire feed shut degree
N41
Wire back extraction time
T41
(1)
Set parameters through the control panel,
see
3.2.1 editing of parameter
of
3.2 Set parameters
through the control panel
.
(2) Manual wire feed can be realized through the remote control in the process of welding (state of no wire
feed in the program):
Indicator
Manual wire feeding function key
Used to adjust the wire’s position
Used to adjust the wire’s position
