909 DYM-1773 Instruction Manual Download Page 3

3

Description of symbols

The rating plate on your tool may show symbols.  

These represent important information about the  

product or instructions on its use.

Wear hearing protection.  

Wear eye protection.  

Wear breathing protection. 

 

Wear safety gloves. 

 

Wear safety footwear. 

 

Read these instructions for use carefully. 

Warning.  

 

 

Explosive material. 

 

 

Use at a distance of at least 15m from  

other people. 

 

 

Extremely hot surface. Do not touch a hot muffler, 

gear box or cylinder. You may get burned. These 

parts get extremely hot from operation and remain 

hot a short time after the unit is turned off. 
 

Thrown objects and rotating blades  

can cause severe injury.

CAUTION.

 Before carrying out any operation stop 

the engine and disconnect the spark plug cap. 

CAUTION.

 Risk of hand and feet injuries. 

 

 

Conforms to relevant standards  

for electromagnetic compatibility 

Noise label rating 96dBA  

(taken at 7.5 metres) you must wear  

ear protection at all times.

Introduction

Your new 909 power tool will more than satisfy 

your expectations. It has been manufactured under 

stringent 909 Quality Standards to meet superior 

performance criteria.
You will find your new tool easy and safe to operate, 

and, with proper care, it will give you many years 

of dependable service.

CAUTION.

 

Carefully read through this entire Instruction 

Manual before using your new 909 Power Tool. Take 

special care to heed the Cautions and Warnings.
Your 909 power tool has many features that will make 

your job faster and easier. Safety, performance, and 

dependability have been given top priority in the 

development of this tool, making it easy to maintain 

and operate.

Environmental protection

Recycle unwanted materials instead 

of disposing of them as waste. All tools, 

hoses and packaging should be sorted, 

taken to the local recycling centre and 

disposed of in an environmentally safe way.

NOISE dB A 

96

Summary of Contents for DYM-1773

















Reviews: