909 DYM-1773 Instruction Manual Download Page 11

11

6.8 Height adjustment instructions

CAUTION: 

Do not at any time 

make any adjustment  

to lawnmower without first  

stopping the engine and 

disconnecting the spark plug 

wire.  

CAUTION:

 before changing 

mowing height, stop mower  

and disconnect spark plug  

cable.
Your mower is equipped with  

a central height adjustment lever offering 7 height positions.
1. Stop mower and disconnect spark plug cable before 

changing mower cutting height.

2. The central height adjustment lever offers you 7 different 

height positions.

3. To change the height of cut, squeeze adjuster lever 

toward the wheel, moving up or down to selected height. 

(Fig.11) All wheels will be in the same height of cut.

7. Maintenance instructions

Spark plug

Use only original replacement spark plug. For best results, 

replace the spark plug every 100 hours of use.

8. Lubrication instrucions

CAUTION: Disconnect spark plug before servicing.

1. Wheels-Lubricate the ball bearings in each wheel at least 

once a season with a light oil.

2. Engine-Follow engine manual for lubrication instructions.

9. Cleaning

CAUTION:

 Do not hose engine. Water can damage engine 

or contaminate the fuel system.
1. Wipe deck with dry cloth.
2. Hose under deck by tilting the mower so that the spark 

plug is up.

9.1 Engine air cleaner

CAUTION:

 Do not allow dirt or dust to clog the air filter foam 

element. The engine air cleaner element must be serviced 

(cleaned) after 25 hours normal mowing. The foam element 

must be serviced regularly ifthe mower is used in dry dusty 

conditions.

To clean air filter

1. Press down the two tabs on top of the filter cover.
2. Remove cover.
3. Wash filter element in soap 

water.  

DO NOT USE GASOLINE!

4. Air dry filter element.
5. Place a few drops of SAE30 

oil on the foam filter and 

squeeze tightly to remove 

any excess oil.

6. Reinstall filter.

NOTE:

 Replace filter if frayed,  

torn, damaged or unable to be cleaned.

Fig. 11

Fig. 12

Filter cover

Summary of Contents for DYM-1773

















Reviews: