26
— Model 675xi Series IP Phone User Guide
Insta
lla
tion and Setup
– 67
57i CT Cordless Handset
The cordless handset is automatically "factory paired" to the base station and
will establish contact with the base station once both units have been
successfully installed. This connection can be verified by checking for the
presence of the Reception range icon
m
beside the battery icon
b
on the
handset screen.
Belt Clip
To install the belt clip, snap one arm of the clip into the slot on the side of the
handset and then slide the other arm into the slot on the other side of the
handset until it snaps into place.
Using a Headset with your Telephone
The 6757i CT cordless handset accepts headsets through the jack on the
bottom of the handset. Contact your telephone equipment retailer or
distributor to purchase a compatible headset. Customers should read and
observe all safety recommendations contained in headset operating guides
when using any headset.
Note:
The battery must be charged for a minimum of six hours prior to initial
usage of the handset.
Handset
(face down)