![background image](http://html1.mh-extra.com/html/8x8-inc/675xi-series/675xi-series_users-reference-manual_3069709027.webp)
Model 675xi Series IP Phone User Guide
—
23
Installation and Setup
Install on the Wall
The 675xi Series IP phone has two pre-drilled wall mounting holes on the back of
the phone.
1.
Using the provided wall mount drilling template, locate and mark the position
for the mounting screws on the wall. Depending on the wall type, you may
need to use wall anchors. Both the screws and wall anchors are included with
your phone.
2.
Place the wall mount holes on the phone over the screw heads on the wall
and pull down to lock the phone in.
3.
In the handset cradle, there is a small clip that sits flush with the cradle
surface. Using a small flathead screwdriver, pull the clip up and remove it from
the phone.
4.
With the arms on the clip facing you and the flat side of the clip torwards the
phone, turn the clip 180 degrees and reinsert it back into the clip cavity in the
phone’s cradle.
Note:
You may wish to purchase a short Ethernet cable from a local sup-
plier for a wall installation.
Wall Mount Holes