8e6 Technologies Enterprise Filter R3000IR, User Manual

Page: 193 / 534

G
LOBAL
A
DMINISTRATOR
S
ECTION
C
HAPTER
1: S
YSTEM SCREEN
8
E
6 T
ECHNOLOGIES
, R3000 E
NTERPRISE
F
ILTER
U
SER
G
UIDE
171
The Radius feature uses a Radius accounting server that
determines which accounts will be filtered and how they will
be filtered. The user profile in the Radius accounting server
holds the filter definition for the user.
Depending on your network setup, there may be more than
one accounting server. Also there may be a client (Network
Access Server or proxy server) that sends accounting
request packets to the Radius accounting server.
Enable Radius
The Radius Mode is “Off” by default. To use Radius, click
the “On” radio button. This action displays the Radius
Authentication Settings frame.
Specify Radius Authentication Settings
1. In the Radius Server field, 1.2.3.9 displays by default.
Enter the IP address of the Radius accounting server.
2. In the Radius Port number field, 1813 displays by
default. Change this number only if the Radius
accounting server uses a different port number.
3. In the Byte Order Mode field, specify the format in which
bytes will be transferred:
• Click the radio button corresponding to Network Byte
Order to transfer the most significant byte first.
• Click the radio button corresponding to Host Byte
Order to use the byte order stored in the server (big
endian or little endian order).
NOTE : The byte order should match the setting on the Radius
accounting server.