8e6 Technologies Enterprise Filter R3000IR, User Manual

Page: 115 / 534

G
LOBAL
A
DMINISTRATOR
S
ECTION
C
HAPTER
1: S
YSTEM SCREEN
8
E
6 T
ECHNOLOGIES
, R3000 E
NTERPRISE
F
ILTER
U
SER
G
UIDE
93
Specify Network Time Protocol Servers
In the Details frame, three NTP server IP addresses display
by default in the Servers list box. These IP addresses are:
128.59.35.142 , 142.3.100.15 , and 129.132.98.11 .
NOTE : Any IP address following the first entry in the Servers list
box is only used in the event that the R3000 cannot access the
primary time NTP server specified. IP addresses are used in the
order in which they display in the list box.
Add an NTP Server
To add an NTP server:
1. Enter the IP address in the NTP Server field.
2. Click Add to include this IP address in the Servers list
box.
3. Click Apply to apply your settings.
Remove an NTP Server
To remove an NTP server:
1. Select the IP address from the Servers list box.
2. Click Delete .
3. Click Apply to apply your settings.
WARNING : If using the R3000 with the 8e6 Technologies Enter-
prise Reporter unit, be sure the ER unit is connected to the same
NTP servers as the R3000.