7SenseTech Hawk 4K User Manual Download Page 8

Flight Modes

Flight Modes

Landing

Return Home

Failsafe

7Hawk4K App

Land

Return Home

press once

press and hold

15 meters

Press the land button once and the drone will slowly land at its current 
spot. Choose a safe and flat area for landing. 
When the drone gets close to the ground, it will jump a few times to find 
flat base.
The motors will stop rotating in 5 seconds after landing and the blue 
LEDs flash slowly.
After pressing land button, you can still make it hover and change its 
position if the landing area is not ideal.

Press and hold the land button and dragonfly will autonomously ascend 
to 15 meters, slowly fly back to the take-off point and land. If there is 
obstacle in the way of return-home, you can still make it hover and 
come back in other paths.
Return-home only works when the drone is 5 meters away from the 
take-off point.

1. If the watch is powered off, the drone will autonomously
  return  home .

2. When the battery is low, the the drone will emit a audible alarm 
  with the red LEDs flashing and autonomously land at its current 
  spot.

3. The control distance of watch is 20 meters. If the drone flies 
  out of range and the radio connection with the watch is lost,
  it will autonomously return to the home point.

You can download the 7Hawk4K app on your iOS and Android 
devices using the QR Code below:

For iOS

For Android

Summary of Contents for Hawk 4K











Reviews: