Assembly
Assembly
Diagram 6：
Notes: Do not install or remove battery while it is powered on to avoid permanent damage to the battery.
Do not force the battery into the airframe if it gets stuck. Try a few more times to match the battery plug
with the PCB slot correctly.
Step 6. Battery ( Diagram 6)
airframe
PCB Slot
Battery Plug
Spring Button
battery
Gesture to install or remove battery
battery plug
Camera strap
Camera
Gimbal
Screw
Notes: Do not install or remove gimbal while the aircraft is powered on to avoid permanent damage to the
gimbal.
Step 5. Gimbal & Camera (Diagram 5)
Match the opening of the gimbal board with the hole in the gimbal
mount and drive in the screw slowly and steadily.
Diagram 5：
Unscrew the camera strap from gimbal.
Attach the camera into the gimbal frame ( The camera lens
is at the front).
Fasten the camera strap with the screw.
Fit the gimbal board onto the mount under the airframe
Slide the gimbal board into the hanger and hold in place with
the screw.
Pull up the spring button at the airframe tail.
Align the battery with the airframe, match the battery plug with the PCB
slot and push in the battery till the end.
The battery will be locked with a click.
To remove the battery, pull up the spring button first and the pull out the
battery slowly.