7SenseTech Hawk 4K User Manual Download Page 6

Assembly

Assembly

Notes: Do not press two buttons at the same time which will interfere each other.
Press the hover button first before switching one flight mode to another.

Instruction of RC Watch

Notes: The motors will be locked again if the aircraft doesn’t take off within 6 seconds after unlock.
After taking off, the drone will hover in place if no further command is given from the watch.

One Key to Take off

Basic Fly Control

Stabilize

Orbit Fly

5m

Orbit fly

①Power on/off(press&hold)
   Front LEDs off(press once)
   

②Taking Off(press once)
   Left Rotate(press&hold)

Drone GPS Signals

Follow Tracker GPS Singals

Drone Battery Level

Flight Height

Watch Battery Level

③USB charge port

④ Auto land(press once)
   Return-home(press&hold)

⑾ Descend(press once)
   Fly Backward(press&hold)

⑿ Fly Rightwards(press&hold)

⑤ Gimbal tilt Up(Left rotate) 
   Gimbal  tilt Down (Right rotate)

⑥Rotate in place(press once)
   Orbit fly(press&hold)

⑦Hover(press once)
   Unlock(press&hold)

⑧ Follow-me(press once)
   Right Rotate(press&hold)

⑨ Ascend(press once)
   Fly forward(press&hold)

⑩ Fly Leftwards(press&hold)

Before take-off, press and hold the unlock button to check if the four 
motors are rotating properly.
Press the take-off button once in the unlocking status and the drone  
will ascend to 5 meters and hover in place.

Press and hold the four arrow buttons and the drone will keep 
flying in forward, backward, leftward or rightward directions as 
long as you hold one of the buttons.

If you press the forward button once, the drone will keep 
ascending until a height of 30 meters.

If you press the backward button once, the drone will keep 
descending autonomously until it is at a height of 5 meters.

You can make it stop at any height when the drone is going up 
or down with a tap on the hover button.

Press and hold the follow me button or the take-off button, the 
drone will keep rotating right or left as long as you hold the 
button.

On pressing and holding the orbit fly button, the drone will fly in an orbit 
at radius of 5 meters. The orbit will surround a center in front of the 
drone. The camera will look at the center all the time.
During orbit fly, press the leftward button once and the orbit will be 0.5 
meter smaller. Similarly if the right button is pressed, the orbit will be
0.5 meter larger.

Land

Take off

Unlock 

Unlock (press&hold)

Land (press once)

Take off (press once)

press and hold

Summary of Contents for Hawk 4K











Reviews: