7HP120 User Manual
29
an error occurs, the Power indicator on Device A (or Device B) and Device C will
flash unevenly for 2 minutes.
7.2 Using
the
Utility
Scenario:
Devices A and B are located in Network N. Device C (the joiner) that is located in
another network attempts to join Network N. See
Do as follows to add Device C to Network N using the Utility:
Step 1
Connect Device C to the network card of a PC.
Step 2
Open the Utility. The
Main
tab page displays information about Device C
after connection succeeds. See
Figure 17
.
Step 3
Click the
Privacy
tab page. Enter a name in the
Private Network Name
field. See
Figure 18
.
Step 4
Click
Set Local Device Only
. When the page as shown in
Figure 19
is
displayed, the setting succeeds. Now Device C has been removed from
its logical network.
Step 5
Press the pushbutton on Device A or B for less than 3 seconds, making
it the ‘adder’.
Step 6
Within 2 minutes, press the pushbutton on Device C (the ‘joiner’) for less
than 3 seconds.
Step 7
Wait for connection to complete.
The Power indicator on Device A (or Device B) and Device C will flash at 1 second
intervals until the process succeeds or fails. It will illuminate steadily on success. If
an error occurs, the Power indicator on Device A (or Device B) and Device C will
flash unevenly for 2 minutes.