7HP120 User Manual
18
This button is used to add a remote device to the existing network by entering the
device password of the device. A dialog box appears.
Figure 12
. You can enter a
device name and the password.
If the device is found and the password is entered correctly, a confirmation box
appears. If a device is not found, a message appears, providing suggestions to
solve the common problems.
Figure 12 Adding the Remote Device
Note:
The device must be in the powerline (plugged in), so that you can confirm the
password and add the device to the network. If the device is not located, a
warning message appears.
Scan
This button is used to perform an immediate search for HomePlugAV devices
connected to the powerline network. By default, the utility automatically scans
every a few seconds and updates the displayed information.
