7HP120 User Manual
26
6.2 Using
the
Utility
Scenario:
Devices A and B are located in different networks. Users want to use them to form
a logical network.
In this case, using the Security/Reset pushbutton cannot pair Devices A and B.
Users can only use the Utility to form a logical network.
Do as follows to form a logical network using the Utility:
Step 1
Connect Device A to the network card of a PC.
Step 2
Open the Utility. The
Main
tab page displays information about Device A
after connection succeeds.
Figure 17 Local device on your computer
Step 3
Click the
Privacy
tab page. Enter a name in the
Private Network Name
field.
Figure 18 Set the network name for your PLC
