background image

 

 

 

 

 

 

 

Introduction

 

Thank you for purchasing a 6K Products product. Our goal is to provide quality products for your job. This manual 
contains warranty information, installation information, operation instructions, parts ordering information, and 
service contact information. 

Warranty 

This 6K Products product carries a one year or 2000 hour warranty on the 6K Products designed and built 
components covering material and workmanship. Purchased components carry the manufactures warranty. This 
warranty does not cover normal wear from use, damage from abuse or misuse, damage from contamination, 
damage from natural disasters, fire damage or incorrect installation. This warranty does not cover labor to remove 
and replace parts, shipping and handling of parts, or shipping and handling for items returned for repair. If any 
component fails you must contact 6K Products at (360)264-2141 before doing any repair work. We will provide 
assistance to obtain warranty from other manufactures on their components. 

Installation 

You will receive one box containing all the parts (Fig. 1). You will need to reassembly the saw unit as shown in  
figure 2. 

 

 

Fig. 1 

Fig. 2 

 

 

Summary of Contents for DH0649 11G24













Reviews: