background image

 

4

 

 

There must be a signal in the area for 5BARz to boost.  Areas where there is no signal 
can not be helped with the 5BARz product. 

 

The 5BARz Road Warrior includes a USB connect port on the side of the phone cradle 
enabling you to power your phone while using the 5BARz. This cable comes standard 

with most phones.  Simply connect the cable to the phone cradle and your phone. 
Contact your phone manufacturer if you need this cable.  

 

For increased coverage area/range and more convenient product usage consider 
purchasing an additional antenna.  See 

www.cellynx.com/products

 for more details. 

 

The LED light on the front of the unit changes colors to give you operation status 

LED Color 

Description 

Action 

Blinking blue 

When unit is turned on it blinks 
blue while self-configuring 

None 

Solid blue 

Unit is ready and operating 

None 

Solid yellow 

This is a temperature warning 

Turn off the unit and restart 
in 10 minutes 

Blinking red 

These are unit-protection 
signals indicating one of the 
following situations 

 

the phone cradle and 
5BARz unit are too close 
together 

 

 

5BARz unit is too close 
to a cellular base station 

 

 

5BARz is overheated 

 

 

 

Further separate the phone 
cradle from the 5BARz unit 

 

As you drive past the station 
the blue light will reappear 

 

Turn off the unit and restart 
in 10 minutes 

Solid red 

Possible internal failure 

Turn the unit off and restart 
in 10 minutes.  If you get a 
solid red signal again contact 

support at 
www.cellynx.com/support 

Summary of Contents for MD015A-800








Reviews: