Soldering the Motor Wires & Capacitors
Notes - Please read:
1.
It is very important to add at least one capacitor between the two terminals of each
motor. This removes about 70% of the electrical noise produced by the motor.
Another 20% can be removed by adding 2 capacitors, one from each terminal to the
case. This is trickier to do, so leave off if you are not sure about it. When we solder
the kits, we add all three capacitors as shown below
2.
The Red wire and Black wire should be connected as shown, or the motors may run
backwards in the example scripts
Motor Step 1 - Identify the Parts
For each motor we provide 1 capacitor1, a red 5cm lead and a black 5cm lead. You can
optionally add 2 more capacitors for that extra noise reduction
