This manual is the property of
. No part of it may be reproduced in any form.
MIRAGE Line Compressors Instruction Manual
General notes on delivery
On receipt of the compressor, check that:
The items supplied are in compliace with the order
specifi cations.
No damage has occurred in transit or due to other causes.
If you fi nd any damage or missing parts, inform the shipping agent or
4tek S.r.l. immediately,
providing full details of the problem.
NOTE
When contacting 4tek s.r.l. or any of its service
centres, always quote the serial number of the
compressor.
Final Testing
The equipment is tested directly by the manufacturer
during production in compliance with the company's quality
system.
The equipment is supplied complete with a Declaration
of Conformity for the product and its main components,
i.e. the air receiver, the safety valve, and the dryer tank, if
present.
4tek S.r.l. shall be held liable for the compressor in its original condition.
4tek S.r.l. shall not be held liable for improper use of the compressor and for any damage
caused by failing to act in compliance with this manual or by acting unreasonably.
Preparatory work to be performed by the end-user
Unless contractually agreed otherwise, the following are normally provided by the end-user:
perfectly level non-slip fl oor with no irregularities;
preparation of the place of installation;
preparation of utilities suitable for the electrical system requirements;
preparation of the electrical system in compliance with statutory legislation in force in the
country of installation;
equipment power supply matching the values shown on the data plate;
ventilation and/or climate control to ensure temperature and humidity in the place of
installation in compliance with the prescriptions given on page 2-04.
1 - 05
4tek S.r.l.
Via dell’Industria 66
20037 Paderno Dugnano
(MI) ITALY
Ref. MIRAGE130E - 00000000
kW 0.0 - V 000 - Hz 00
- μF
00
0000
Tel. +39 02 91082211 - Internet: www.4-tek.it
