background image

1   Spa operation

1.1 

Hydro-massage Pump

This Spa has 1 pump (two speed) enabling you to select the preferred intensity of hydro-massage. This pump is connected and operated through
the display (Fig.1). 

• Press on the buttons          to activate the pump at low speed. 
• Press the same button a second time to turn to high speed.
• Pressing the same button a third time turns the Pump off. 

A built-in timer automatically turns off the Pump after 20 minutes. 

For spa’s without circulation pumps only: if the pump is running automatically at low speed or remains running on low speed then the heating and/or fi ltration 
cycle is operating and the pump will continue until the water has reached the desired temperature and/or the fi lter cycle is fi nished.

1.2 

Lighting

• Press the         to turn light on.
• Press a second time (within 4 seconds) to switch to a different color.
• Press a third time (within 4 seconds) to continue changing the color or alter the lighting sequence.

A built-in timer automatically turns off the light after 2 hours.

1.3 

Blower (where fi tted)

When your spa has a blower you can start it the following way:

• Press the         to turn blower on.
• Press a second time to stop the blower.

A built-in timer automatically turns off the Blower after 20 minutes.

1   Spa Operation

4

Summary of Contents for Savannah













Reviews: