3.2
Display Rotation
This function is used to invert the direction of the display to make it easier to read when you are seated in the spa.
This function can be activated as follows:
Press and hold for 5 seconds the button. The function is disabled in the same way. The function is also disabled by switching the pack off.
3.3
Stand By Function
Allows you to lock all the functions (60-min duration) so as to carry out the ordinary maintenance operations without cutting off power to the spa.
The STAND-BY function is activated by pressing the key for 5 seconds. Whenever the function is active, the message “Sby” will be visualized
alternatively on your display and the elapsing time will be in minutes. The STAND-BY function locks the fi ltering/purging cycles, which are
programmed and carried out every 40 min after the end of the stand-by function. This function can be terminated by pressing the key LIGHT
for 5 seconds or available time has elapsed (60 minutes).
3.4
Clock Function
This function is controlled by the user by the key , which helps you visualize and set the time on the clock of your Control.
Carry out the following steps, as listed below:
• Keep on pressing the key for 5 seconds until your display visualizes the time digits which will blink on and off slowly;
• By using the keys and on the keypad, choose your desired time;
• Press the key to change the minutes;
• By using the keys and , choose your desired minutes;
• Press for the third time the key to store the new settings.
3 Other
8
