PRO-160 V2.0 10/19
Page 7
www.4qd.co.uk
10. Display
The Pro-160 has a 2 line display to display useful information during operation
and programming. A display adaptor board is available that allows the display
and / or keypad to be mounted remotely from the Pro-160.
During operation the display will show information in this format
Volts = battery voltage.
Volts = battery voltage.
Duty cycle = % of battery voltage being applied to the motor [- = reverse].
Motor current in amps.
Profile = profile currently selected [suffix R indicates reverse].
Temp = temperature
in ‘C. Prefix c denotes controller temp, b denotes battery
temp, m denotes motor temp.*b and m only displayed if additional thermistors are
fitted.
Battery current in amps. Please note the difference between this and motor
current.
The display will also show any alert or fault information.
11. Programming
The Pro-160 has 15 profiles, 14 of which can be edited to suit the user. Each
profile has a number of settings which
control various aspects of the controller’s
behavior. We have configured the first 9 profiles with values that are a good
starting point for the most popular applications, full details are in the table at the
end of the manual.
It is not possible to make changes to profile 01, to save changes you must first
select another profile.
To edit the settings the SEL button should be held down while turning on the
ignition, you can then navigate through the options and settings as shown in the
menu structure below. Remember to use the menu option to save changes.
