23
RFID Module Installation
1.
Turn off the system power properly through the operating system, then turn off any external
devices.
2.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
Regardless of the power-on state, voltage is always present on the main board as
long as the system is plugged into an active AC outlet. You must disconnect the
power cord to avoid damage to the internal components of the system.
3.
From the bottom of the flat panel's rear side, remove two screws and detach the cover.
4.
If the RFID components are already assembled in the custom cover module, then skip to step 6.
5.
If the module is disassembled, set the RFID circuit board into the custom cover. Top it with the flat
metal piece and secure with four screws.
6.
Attach the cover module into the panel, ensuring it is plugged securely into the socket. Secure with
two screws.
7.
Reconnect the power cord and any external devices, then turn on the system.
