10
Opening Base Cover
CAUTION:
To prevent loss of work and damage to the system or drive:
If you are inserting or removing a drive, shut down the operating system
properly, turn off the system, and unplug the power cord. Do not remove a drive
while the system is on or in standby mode.
Before handling a drive, ensure that you are discharged of static electricity. While
handling a drive, avoid touching the connector.
1.
Turn off the system power properly through the operating system, then turn off any external
devices.
2.
Disconnect the power cord from the power outlet and disconnect any external devices.
3.
Place the main unit upside down. Then remove the six screws indicated at the bottom of the base.
CAUTION:
To avoid scratching the panel, before doing dismantling, put a piece of cloth or
cushion under the main unit.
4.
Replace the main unit to an upright position, then open the base cover in the direction of the arrow.
