21
Rear Mount VFD Installation (need install rear mound USB driver)
1.
Turn off the system power properly through the operating system, then turn off any external
devices.
2.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
Regardless of the power-on state, voltage is always present on the main board as
long as the system is plugged into an active AC outlet. You must disconnect the
power cord to avoid damage to the internal components of the system.
3.
From the top of the flat panel's rear side, remove two screws and detach the cover.
4.
Align the VFD hinge guide posts to the two indicated holes and insert the VFD module.
5.
Secure the VFD module with four screws.
6.
Attach the hinge cover with two screws.
