5
Fig. 1
SD Card insert
Fig. 2
RS485 connector
Fig. 3
Ethernet connector
3.
Quick Start
3.1 Cabling and connection
The wiring and installation of EasyNET are very simple.
This guide briefly illustrates how to make electrical connections and settings
for initial access.
3.2 SD Card
EasyNET stores the data in a standard "SD card". Insert the
SD card with the connectors face toward the silk-screen
printed part, as shown in Fig.1.
The connector is a push-push type: to insert the card,
press it until a click is felt. To remove the SD card, press
lightly; by clicking, the card will lift a bit and it can be
withdrawn. We always recommend the use of industrial-
grade SD.
3.3 Serial
If you use the serial port to read data from ModBus RTU
devices, connect the RS485 wires as shown in Fig.2.
3.4 Ethernet
If you are using an Ethernet connection to read data from
ModBus TCP devices, insert the jack of the Ethernet cable
into the appropriate RJ connector of the EasyNET, as
shown in Fig.3.
