4KDVB CV-F01-TX User Manual Download

Page: 6 / 7

CV-F01-TX User Manual

Figure 6 Text mode setting steps

Note:



If OSD setting is not required, please uncheck the option which is in front of the

Enable

OSD



The crossover serial cable with DB9 pin female connector is needed.

Parameter Setting

The CV-F01-TX is available in audio input selection, image display setting and port

parameter setting through the configuration tool.



Audio input is available in Input 1 or input 2.



Image display mode can be controlled by the configuration tool or DIP switch.



Brightness, chorma, saturability, contrast and mode setting are available.

The details as shown in figure 7.

Summary of Contents for CV-F01-TX

Page 1: ...Connection introduction Figure 2 CV F01 TX Fiber Optic Transmitter Connection Note Please connect one single mode optical fiber to the TX port in the fiber optic connector 3 DIP Switch Dial up is OFF the corresponding number is 1 dial down is ON the corresponding number is 0 The DIP switch operating instructions as shown in Table 1 And the DIP switch ...

Page 5: ... Step 2 Click the checkbox which is in front of the Enable OSD Step 3 Design the text content according to your needs Step 4 Set the color of text Step 5 Set the location and size Step 6 Select the magnification Step 7 Click the Download button and the setting will come into effect immediately The details as shown in figure 6 ...

Page 7: ...rent state of the item please click the Load button If the control mode is Dial Switch the resolution of the item can be configured by DIP switch directly The important and commonly used OSD information can be saved to the local computer software to facilitate later use through the configuration tool ...