CV-F01-TX User Manual
2
setting and the corresponding output mode and resolutions as shown in Table 2.
Table 1 DIP switch operation instruction
Table 2 DIP switch setting and the corresponding output mode and resolutions
Output Resolution & Mode
Dial Switch 1
Dial Switch 2
Corresponding
Binary Code
Output: 800×600
Signal Source: Input 1
OFF
OFF
11
Output: 800×600
Signal Source: Input 2
ON
OFF
01
Output: 1600×900
Signal Source: The two signal
sources are divided into left and
right to display
OFF
ON
10
Output: 1600×600
Signal Source: The two signal
sources are divided into left and
right to display
ON
ON
00
Note: Default output mode and resolution can be configured through the serial port.
4.
Indicator Light
Table 3 Indicator light and signal state
Light State
L1 flash
L2 on/off
L3 on/off
Description
The CV-F01-TX
works normally
on: Input 2 has signal
off: No signal in Input 2
on: Input 1 has signal
off: No signal in Input 1
DIP
Item
Description
Dial both switch 1
and switch 2
Function
To set output mode and resolution.
Applying Condition
Before applying power to the CV-F01-TX or
during the service of the item.
Operation
Dialing combination of the DIP switch and
the corresponding resolutions as shown in
table 2.
Dial only switch 3
Function
To set input standard of CVBS.
Applying Condition
Before applying power to the CV-F01-TX or
during the service of the item.
Operation
Dial OFF: PAL standard
Dial ON: NTSC standard
Dial only switch 4
Function
To set the functions of RS232 serial port.
Applying Condition
Before applying power to the CV-F01-TX or
during the service of the item.
Operation
Only OFF is available.