Quick Installation Guide
OWL630 Enterprise Access Point
ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
14
Step 4. Configure WDS (Wireless Distribution System) Settings (Optional)
To extend the wireless coverage, OWL630 supports up to 8 WDS links for connecting wirelessly to other
WDS-capable APs (peer APs). By default, all WDS profiles are disabled.
Click on the
Wireless
main menu button.
Select the
Repeater Settings
tab.
Choose
WDS
as the
Repeater Type
.
Choose the desired WDS profile:
(a) Enable the
WDS
.
(b) Enter the
MAC Address
(peer AP) and then Click
SAVE
.
If you use another OWL630 as the peer AP, simply repeat the above-mentioned steps to configure another
peer AP(s).
Note:
On each and every configuration page, you may
Click
SAVE
to save the changes, but you must reboot the system upon the completion of all
configuration settings for the changes to take effect. When clicking
SAVE
, the following message will
appear:
“Some modifications have been saved and will take effect after Reboot.”
Congratulations!
Now, 4ipnet OWL630 is installed and configured successfully.