Product Handbook
Product Handbook
Product Handbook
Product Handbook
EAP705 Enterprise Access Point
ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
10
Step 3. Configure VAP (Virtual Access Point) Profile Settings
VAP Configuration Page (VAP-1 shown)
The EAP705 supports up to 8 virtual APs (VAPs) per radio.
Configure VAP profile settings
:
(a) Select the
VAP Configuration
tab to configure the settings of the desired VAP.
(b) Choose a specific RF card to set up
(c) Enable a selected VAP from the drop-down menu of
Profile Name
and configure related
settings below.
(d) Check “CAPWAP Tunnel Interface” if you would like data of this VAP to go through the
Controller when the Access Point is managed by CAPWAP.
Check VAP status
:
After finishing VAP configuration, the status of the enabled Virtual APs shall be reflected on the VAP
Overview page –
at Wireless > VAP Overview
.