background image

D.2 – Industry Canada Statement

 

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the 
following two conditions: (1) This device may not cause harmful interference, and (2) this 
device must accept any interference received, including interference that may cause 
undesired operation. 

Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils 
radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le 
dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter 
tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement 
indésirable.  

IMPORTANT NOTE: Radiation Exposure Statement: 

This equipment complies with IC radiation exposure limits set forth for an uncontrolled 
environment. This equipment should be installed and operated with minimum distance 
20cm between the radiator & your body. 

NOTE IMPORTANTE: (Pour l'utilisation de dispositifs mobiles): 

 

Déclaration d'exposition aux radiations: 
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un 
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 
20 cm de distance entre la source de rayonnement et votre corps. 

4Gon   www.4Gon.co.uk   [email protected]   Tel: +44 (0)1245 808295   Fax: +44 (0)1245 808299

Summary of Contents for ENH202

























































































Reviews: