6 .2
Mixed operation / BiSecur and fixed code 868 MHz
If the BiSecur radio has been set, mixed operation is possible, i.e. existing hand
transmitters with an 868 MHz fixed code (grey hand transmitters with blue
buttons or the device designation HSD2-868) can be taught in from the BiSecur
hand transmitter.
7
Reset
Each transmitter button is assigned to a new radio code by means of the
following steps.
1 .
Open the door handle housing and remove the battery for 10 seconds.
2 .
Press a transmitter button and keep it pressed.
3 .
Insert the battery.
– The LED slowly flashes in blue for 4 seconds.
– The LED flashes rapidly in blue for 2 seconds.
– The LED is illuminated blue for a long time.
4 .
Release the transmitter button.
All radio codes are newly assigned .
5 .
Close the door handle housing.
NOTE:
If the transmitter button is released prematurely, no new radio codes are
assigned.
7 .1
Set the fixed code 868 MHz .
If immediately following the device reset, the transmitter button remains pressed,
the fixed code 868 MHz will be activated.
– The LED slowly flashes in red for 4 seconds.
– The LED flashes rapidly in red for 2 seconds.
– The LED is illuminated red for a long time.
All radio codes are newly assigned .
NOTE:
If the transmitter button is released prematurely, the BiSecur radio will remain
active.
Further information about operating the radio switch with the fixed code 868 MHz
can be found on the Internet at
www .hoermann .com
16
4006055 RE / 10.2014
ENGLISH
